STANDARD KIT
- £3399 + VAT
Price includes fully triangulated space frame chassis ready to
take the donor engine running gear and steering supplied in the
kit. No welding required ,just a few holes to drill and away you
go building your own car.
The one piece
GRP body is included and is available in a huge range of colours
ready for a polish. All the suspension components
are included including adjustable shock absorbers, powder coated
springs, all bushes and inserts and all ball joints. You also
get a steering rack (used) and hubs, front calipers and front
and rear uprights (used).
An
alloy petrol tank is included with a locking cap which is designed
to take the donor fuel pump and gauge sender. All the
alloy comes with the kit for the floor and bulkheads. These will
need holes cutting etc to fit around the donor pedal assembly
and servo.
Alloy radiator pipes to extend are supplied to take
the coolant to the front of the car where the donor radiator
is fitted.You
will also receive two radiator grills for the top and front.
Assembly Guide CD ROM |
|
- Seats GRP black or to match body colour
(pair bucket type) £180
- Stainless Steel Exhaust system £324
(excluding donor manifold).
- Wiring loom with fuses/relays, lighting set
SVA O.K £412
- Roll bar and bracing (MSA spec 48.3mm CDS) £200
(welded to chassis during fabrication).
- Powder coating £235
- Alloy Pedal Assembly with Balance Bar & 3
Cylinders. £215
- You will need to provide pipes, clips, rivets,
screws, sealant & nuts & bolts.
Please Note: All prices are ex VAT
|
|